Hi,
My epw calculation for a system runs for a while and stops with message as :
Fermi energy is calculated from the fine k-mesh: Ef = 8.027566 eV
===================================================================
ibndmin = 8 ebndmin = 7.908 eV
ibndmax = 9 ebndmax = 8.147 eV
Number of ep-matrix elements per pool : 6300 ~= 49.22 Kb (@ 8 bytes/ DP)
A selecq.fmt file was found but re-created because selecqread == .FALSE.
Number selected, total 100 158
Number selected, total 200 341
Number selected, total 300 582
Number selected, total 400 1248
Number selected, total 500 1506
Number selected, total 600 1714
Number selected, total 700 1952
Number selected, total 800 2227
Number selected, total 900 2889
Number selected, total 1000 3123
Number selected, total 1100 3297
We only need to compute 1155 q-points
===================================================================================
= BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
= RANK 1 PID 718577 RUNNING AT compute-0-5
= KILLED BY SIGNAL: 9 (Killed)
===================================================================================
Also I have attached my input files used in the calculaton.
BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
Moderator: stiwari
BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
- Attachments
-
- runfile.png (47.8 KiB) Viewed 4012 times
-
- epw2.png (34.39 KiB) Viewed 4012 times
-
- epw1.png (44.43 KiB) Viewed 4012 times
Re: BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
Hello,
It seems that the inputs could be fine.
Could you provide the full backtrace of the problem ?
Thanks,
Samuel
It seems that the inputs could be fine.
Could you provide the full backtrace of the problem ?
Thanks,
Samuel
Prof. Samuel Poncé
Chercheur qualifié F.R.S.-FNRS / Professeur UCLouvain
Institute of Condensed Matter and Nanosciences
UCLouvain, Belgium
Web: https://www.samuelponce.com
Chercheur qualifié F.R.S.-FNRS / Professeur UCLouvain
Institute of Condensed Matter and Nanosciences
UCLouvain, Belgium
Web: https://www.samuelponce.com
Re: BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES
Hi bkarki724,
I think you are running out of memory. I would suggest to increase the memory in your calculation.
Thanks!
Gyanu
I think you are running out of memory. I would suggest to increase the memory in your calculation.
Thanks!
Gyanu