Negative elements in electron-phonon coupling matrix

This section is dedicated to theory question related to the use of the EPW software

Moderator: stiwari

Post Reply
Patrick_1396
Posts: 3
Joined: Fri Aug 11, 2023 4:00 pm
Affiliation: Newcastle University

Negative elements in electron-phonon coupling matrix

Post by Patrick_1396 »

Hi,

I am trying to calculate deformation potentials for use in scattering rates for cubic silicon carbide and cubic boron nitride. To do this I am calculating the electron phonon coupling matrix following the method given here https://journals.aps.org/prb/abstract/1 ... .104.19520

However, as SiC and cBN are polar, I am calculating the total and long range elements and subtracting the long range elements. This results in negative values in the elph coupling matrix.

The figures attached show the electron phonon coupling elements along directions of interest. In cBN_aco.png, these are short steps away from the conduction band minimum of length 0.01 2pi/a in the direction given on the x-axis. In cBN_opt.png, these are paths from the conduction band minimum at [001] to a perpendicular conduction band minimum at [100] (f scattering).

I am unsure of how to proceed with this. Do the negative values have meaning or is it some mistake in the input files?

Thanks,
Patrick.
Attachments
cBN_aco.png
cBN_aco.png (159.17 KiB) Viewed 12958 times
cBN_opt.png
cBN_opt.png (225.3 KiB) Viewed 12958 times
Post Reply