Testing USPP vs NC: electron-phonon matrix elements

Dear developers,

I have calculated the electron-phonon matrix element for graphene with both a norm-conserving and an ultrasoft pseudopotential. While the matrix elements are giving acceptable values for the norm-conserving pseudopotential (see Fig. 2 from https://journals.aps.org/prb/abstract/1 … .93.125432 ), the values for ultrasoft pseudopotential differ from the norm-conserving one, as can be seen in Fig 1.

https://uab-my.sharepoint.com/:i:/g/per ... w?e=YxC0ah

Fig 1: Squared modulus of the electron phonon-matrix elements at k=K for q from gamma to K. USSP results are red, NC are in green.

Do USPPs require any special attention or action?

The used pseudos are:
-NC: http://www.pseudo-dojo.org/pseudos/nc-s … d/C.upf.gz
-USPP: https://www.quantum-espresso.org/upf_fi … sl.0.1.UPF

The ecutwfc and ecutrho for both pseudos are converged up to differences of ~1 meV.

Structures were provided similar void, and have been relaxed to have in-plane stresses lower than 0.03kbar and forces smaller than 1.0e-6 Ry/au.

For completeness, I also provide input files for both scf, ph and epw.

Thanks,

Mart

USPP SCF

[code:3mufmd2h]
&control
calculation =‘scf’
restart_mode =‘from_scratch’,
pseudo_dir = ‘.’,
outdir =‘graphene’
prefix =‘graphene’
tstress = .true.
tprnfor = .true.
wf_collect =.true.
/
&system
ibrav = 4,
celldm(1) = 4.621162409689604,
celldm(3) = 8.087578323,
nat = 2
ntyp = 1,
ecutwfc = 70.0
ecutrho = 840
nbnd = 16,
occupations =‘fixed’,

/
&electrons
startingwfc=‘atomic+random’,
diagonalization=‘david’,
conv_thr = 1.0e-12,
mixing_mode = ‘local-TF’
/
ATOMIC_SPECIES
C 12.0107 C.upf
ATOMIC_POSITIONS {crystal}
C 0.000000000 0.000000000 0.50000000
C 0.333333333 0.666666667 0.50000000
K_POINTS {automatic}
32 32 1 0 0 0
[/code:3mufmd2h]

#USPP PH
[code:3mufmd2h]

&inputph
outdir = ‘./graphene’,
prefix = ‘graphene’,
fildyn = ‘graphene.dyn’,
fildvscf = ‘dvscf’,
ldisp = .true.,
nq1 = 16,
nq2 = 16,
nq3 = 1,
tr2_ph = 1.0d-16
/
[/code:3mufmd2h]

#USPP EPW1
[code:3mufmd2h]

&inputepw
prefix = ‘graphene’,
outdir = ‘./graphene/’
dvscf_dir = ‘./save’

elph = .true.
kmaps = .false.
epbwrite = .true.
epbread = .false.
epwwrite = .true.
epwread = .false.
lpolar = .false.

wannierize = .true.
nbndsub = 5
nbndskip = 0
num_iter = 2000
dis_froz_max= 0.0d0
proj(1) = ‘f=0.0000000000,0.0000000000,0.500000000:sp3’
proj(2) = ‘f=0.3333333333,0.6666666667,0.500000000:pz’
wdata(1) = ‘dis_num_iter = 1000’
wdata(2) = ‘guiding_centres = true’
wdata(3) = ‘bands_plot = .true.’
wdata(4) = ‘begin kpoint_path’
wdata(5) = ‘G 0.0000000000 0.0000000000 0.0000000000 M 0.5000000000 0.0000000000 0.0000000000’
wdata(6) = ‘M 0.5000000000 0.0000000000 0.0000000000 K 0.3333333333 0.3333333333 0.0000000000’
wdata(7) = ‘K 0.3333333333 0.3333333333 0.0000000000 G 0.0000000000 0.0000000000 0.0000000000’
wdata(8) = ‘end kpoint_path’

elecselfen = .false.
phonselfen = .false.
a2f = .false.

eptemp = 300 !
ngaussw = 0
degaussq = 0.03 ! meV
degaussw = 0.01 ! eV

efermi_read = .true.
fermi_energy = -2.5441
!fsthick = 14.000

nkf1 = 32
nkf2 = 32
nkf3 = 1
nqf1 = 16
nqf2 = 16
nqf3 = 1

nk1 = 32
nk2 = 32
nk3 = 1
nq1 = 16
nq2 = 16
nq3 = 1
/
30 cartesian
0.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+00
0.000000000000000E+00 0.721687836487043E-01 0.000000000000000E+00
0.000000000000000E+00 0.144337567297409E+00 0.000000000000000E+00
0.000000000000000E+00 0.216506350946113E+00 0.000000000000000E+00
0.000000000000000E+00 0.288675134594817E+00 0.000000000000000E+00
0.000000000000000E+00 0.360843918243522E+00 0.000000000000000E+00
0.000000000000000E+00 0.433012701892226E+00 0.000000000000000E+00
0.000000000000000E+00 0.505181485540930E+00 0.000000000000000E+00
0.000000000000000E+00 -0.577350269189635E+00 0.000000000000000E+00
0.625000000000054E-01 0.108253175473056E+00 0.000000000000000E+00
0.625000000000054E-01 0.180421959121761E+00 0.000000000000000E+00
0.625000000000054E-01 0.252590742770465E+00 0.000000000000000E+00
0.625000000000054E-01 0.324759526419169E+00 0.000000000000000E+00
0.625000000000054E-01 0.396928310067874E+00 0.000000000000000E+00
0.625000000000054E-01 0.469097093716578E+00 0.000000000000000E+00
0.625000000000054E-01 0.541265877365282E+00 0.000000000000000E+00
0.125000000000011E+00 0.216506350946113E+00 0.000000000000000E+00
0.125000000000011E+00 0.288675134594817E+00 0.000000000000000E+00
0.125000000000011E+00 0.360843918243522E+00 0.000000000000000E+00
0.125000000000011E+00 0.433012701892226E+00 0.000000000000000E+00
0.125000000000011E+00 0.505181485540930E+00 0.000000000000000E+00
0.125000000000011E+00 0.577350269189635E+00 0.000000000000000E+00
0.187500000000016E+00 0.324759526419169E+00 0.000000000000000E+00
0.187500000000016E+00 0.396928310067874E+00 0.000000000000000E+00
0.187500000000016E+00 0.469097093716578E+00 0.000000000000000E+00
0.187500000000016E+00 0.541265877365282E+00 0.000000000000000E+00
0.250000000000021E+00 0.433012701892226E+00 0.000000000000000E+00
0.250000000000021E+00 0.505181485540930E+00 0.000000000000000E+00
0.250000000000021E+00 0.577350269189635E+00 0.000000000000000E+00
0.312500000000027E+00 0.541265877365282E+00 0.000000000000000E+00

[/code:3mufmd2h]

#USPP EPW2
[code:3mufmd2h]

&inputepw
prefix = ‘graphene’,
outdir = ‘./graphene/’
dvscf_dir = ‘./save’

elph = .true.
kmaps = .true.
epbwrite = .false.
epbread = .false.
epwwrite = .false.
epwread = .true.
lpolar = .false.

wannierize = .false.
nbndsub = 5
nbndskip = 0
num_iter = 2000
dis_froz_max= 0.0d0
proj(1) = ‘f=0.0000000000,0.0000000000,0.500000000:sp3’
proj(2) = ‘f=0.3333333333,0.6666666667,0.500000000:pz’
wdata(1) = ‘dis_num_iter = 1000’
wdata(2) = ‘guiding_centres = true’
wdata(3) = ‘bands_plot = .true.’
wdata(4) = ‘begin kpoint_path’
wdata(5) = ‘G 0.0000000000 0.0000000000 0.0000000000 M 0.5000000000 0.0000000000 0.0000000000’
wdata(6) = ‘M 0.5000000000 0.0000000000 0.0000000000 K 0.3333333333 0.3333333333 0.0000000000’
wdata(7) = ‘K 0.3333333333 0.3333333333 0.0000000000 G 0.0000000000 0.0000000000 0.0000000000’
wdata(8) = ‘end kpoint_path’

elecselfen = .false.
phonselfen = .false.
a2f = .false.

eptemp = 300 !
ngaussw = 0
degaussq = 0.03 ! meV
degaussw = 0.01 ! eV

prtgkk = .true.
efermi_read = .true.
fermi_energy = -2.5441
fsthick = 27.000

filkf = ‘Kpoint.dat’
filqf = ‘qpath.dat’

nk1 = 32
nk2 = 32
nk3 = 1
nq1 = 16
nq2 = 16
nq3 = 1
/
30 cartesian
0.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+00
0.000000000000000E+00 0.721687836487043E-01 0.000000000000000E+00
0.000000000000000E+00 0.144337567297409E+00 0.000000000000000E+00
0.000000000000000E+00 0.216506350946113E+00 0.000000000000000E+00
0.000000000000000E+00 0.288675134594817E+00 0.000000000000000E+00
0.000000000000000E+00 0.360843918243522E+00 0.000000000000000E+00
0.000000000000000E+00 0.433012701892226E+00 0.000000000000000E+00
0.000000000000000E+00 0.505181485540930E+00 0.000000000000000E+00
0.000000000000000E+00 -0.577350269189635E+00 0.000000000000000E+00
0.625000000000054E-01 0.108253175473056E+00 0.000000000000000E+00
0.625000000000054E-01 0.180421959121761E+00 0.000000000000000E+00
0.625000000000054E-01 0.252590742770465E+00 0.000000000000000E+00
0.625000000000054E-01 0.324759526419169E+00 0.000000000000000E+00
0.625000000000054E-01 0.396928310067874E+00 0.000000000000000E+00
0.625000000000054E-01 0.469097093716578E+00 0.000000000000000E+00
0.625000000000054E-01 0.541265877365282E+00 0.000000000000000E+00
0.125000000000011E+00 0.216506350946113E+00 0.000000000000000E+00
0.125000000000011E+00 0.288675134594817E+00 0.000000000000000E+00
0.125000000000011E+00 0.360843918243522E+00 0.000000000000000E+00
0.125000000000011E+00 0.433012701892226E+00 0.000000000000000E+00
0.125000000000011E+00 0.505181485540930E+00 0.000000000000000E+00
0.125000000000011E+00 0.577350269189635E+00 0.000000000000000E+00
0.187500000000016E+00 0.324759526419169E+00 0.000000000000000E+00
0.187500000000016E+00 0.396928310067874E+00 0.000000000000000E+00
0.187500000000016E+00 0.469097093716578E+00 0.000000000000000E+00
0.187500000000016E+00 0.541265877365282E+00 0.000000000000000E+00
0.250000000000021E+00 0.433012701892226E+00 0.000000000000000E+00
0.250000000000021E+00 0.505181485540930E+00 0.000000000000000E+00
0.250000000000021E+00 0.577350269189635E+00 0.000000000000000E+00
0.312500000000027E+00 0.541265877365282E+00 0.000000000000000E+00
[/code:3mufmd2h]

#NC SCF
[code:3mufmd2h]
&CONTROL
calculation=‘scf’,
outdir=‘graphene’,
tstress = .true.
tprnfor = .true.
prefix=‘graphene’,
pseudo_dir=‘./’,
verbosity=‘low’,
wf_collect=.true.,
/

&SYSTEM
ibrav=4,
celldm(1)= 4.629208284320491
celldm(3)= 8.073660395766156
nat=2,
ntyp=1,
ecutwfc=100,
input_dft=‘LDA’,
occupations=‘fixed’
nbnd = 16
/
&ELECTRONS
startingwfc=‘atomic+random’,
diagonalization=‘david’,
conv_thr = 1.0e-12,
mixing_mode = ‘local-TF’
/
ATOMIC_SPECIES
C 12.010700d0 C.upf
K_POINTS {automatic}
32 32 1 0 0 0
ATOMIC_POSITIONS (crystal)
C 0.000000000 0.000000000 0.50000000000000
C 0.333333333 0.666666667 0.50000000000000
[/code:3mufmd2h]

#NC PH
[code:3mufmd2h]

&inputph
outdir = ‘./graphene’,
prefix = ‘graphene’,
fildyn = ‘graphene.dyn’,
fildvscf = ‘dvscf’,
ldisp = .true.,
nq1 = 16,
nq2 = 16,
nq3 = 1,
tr2_ph = 1.0d-16
/
[/code:3mufmd2h]

#NC EPW1
[code:3mufmd2h]

&inputepw
prefix = ‘graphene’,
outdir = ‘./graphene/’
dvscf_dir = ‘./save’

elph = .true.
kmaps = .false.
epbwrite = .true.
epbread = .false.
epwwrite = .true.
epwread = .false.
lpolar = .false.

wannierize = .true.
nbndsub = 5
nbndskip = 0
num_iter = 2000
dis_froz_max= 0.0d0
proj(1) = ‘f=0.0000000000,0.0000000000,0.500000000:sp3’
proj(2) = ‘f=0.3333333333,0.6666666667,0.500000000:pz’
wdata(1) = ‘dis_num_iter = 1000’
wdata(2) = ‘guiding_centres = true’
wdata(3) = ‘bands_plot = .true.’
wdata(4) = ‘begin kpoint_path’
wdata(5) = ‘G 0.0000000000 0.0000000000 0.0000000000 M 0.5000000000 0.0000000000 0.0000000000’
wdata(6) = ‘M 0.5000000000 0.0000000000 0.0000000000 K 0.3333333333 0.3333333333 0.0000000000’
wdata(7) = ‘K 0.3333333333 0.3333333333 0.0000000000 G 0.0000000000 0.0000000000 0.0000000000’
wdata(8) = ‘end kpoint_path’

elecselfen = .false.
phonselfen = .false.
a2f = .false.

eptemp = 300 !
ngaussw = 0
degaussq = 0.03 ! meV
degaussw = 0.01 ! eV

efermi_read = .true.
fermi_energy = -2.5596
!fsthick = 14.000

nkf1 = 32
nkf2 = 32
nkf3 = 1
nqf1 = 16
nqf2 = 16
nqf3 = 1

nk1 = 32
nk2 = 32
nk3 = 1
nq1 = 16
nq2 = 16
nq3 = 1
/
30 cartesian
0.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+00
0.000000000000000E+00 0.721687836486904E-01 0.000000000000000E+00
0.000000000000000E+00 0.144337567297381E+00 0.000000000000000E+00
0.000000000000000E+00 0.216506350946071E+00 0.000000000000000E+00
0.000000000000000E+00 0.288675134594762E+00 0.000000000000000E+00
0.000000000000000E+00 0.360843918243452E+00 0.000000000000000E+00
0.000000000000000E+00 0.433012701892143E+00 0.000000000000000E+00
0.000000000000000E+00 0.505181485540833E+00 0.000000000000000E+00
0.000000000000000E+00 -0.577350269189523E+00 0.000000000000000E+00
0.624999999999934E-01 0.108253175473036E+00 0.000000000000000E+00
0.624999999999934E-01 0.180421959121726E+00 0.000000000000000E+00
0.624999999999934E-01 0.252590742770416E+00 0.000000000000000E+00
0.624999999999934E-01 0.324759526419107E+00 0.000000000000000E+00
0.624999999999934E-01 0.396928310067797E+00 0.000000000000000E+00
0.624999999999934E-01 0.469097093716488E+00 0.000000000000000E+00
0.624999999999934E-01 0.541265877365178E+00 0.000000000000000E+00
0.124999999999987E+00 0.216506350946071E+00 0.000000000000000E+00
0.124999999999987E+00 0.288675134594762E+00 0.000000000000000E+00
0.124999999999987E+00 0.360843918243452E+00 0.000000000000000E+00
0.124999999999987E+00 0.433012701892143E+00 0.000000000000000E+00
0.124999999999987E+00 0.505181485540833E+00 0.000000000000000E+00
0.124999999999987E+00 0.577350269189523E+00 0.000000000000000E+00
0.187499999999980E+00 0.324759526419107E+00 0.000000000000000E+00
0.187499999999980E+00 0.396928310067797E+00 0.000000000000000E+00
0.187499999999980E+00 0.469097093716488E+00 0.000000000000000E+00
0.187499999999980E+00 0.541265877365178E+00 0.000000000000000E+00
0.249999999999973E+00 0.433012701892143E+00 0.000000000000000E+00
0.249999999999973E+00 0.505181485540833E+00 0.000000000000000E+00
0.249999999999973E+00 0.577350269189523E+00 0.000000000000000E+00
0.312499999999967E+00 0.541265877365178E+00 0.000000000000000E+00
[/code:3mufmd2h]

#NC EPW2
[code:3mufmd2h]

&inputepw
prefix = ‘graphene’,
outdir = ‘./graphene/’
dvscf_dir = ‘./save’

elph = .true.
kmaps = .true.
epbwrite = .false.
epbread = .false.
epwwrite = .false.
epwread = .true.
lpolar = .false.

wannierize = .false.
nbndsub = 5
nbndskip = 0
num_iter = 2000
dis_froz_max= 0.0d0
proj(1) = ‘f=0.0000000000,0.0000000000,0.500000000:sp3’
proj(2) = ‘f=0.3333333333,0.6666666667,0.500000000:pz’
wdata(1) = ‘dis_num_iter = 1000’
wdata(2) = ‘guiding_centres = true’
wdata(3) = ‘bands_plot = .true.’
wdata(4) = ‘begin kpoint_path’
wdata(5) = ‘G 0.0000000000 0.0000000000 0.0000000000 M 0.5000000000 0.0000000000 0.0000000000’
wdata(6) = ‘M 0.5000000000 0.0000000000 0.0000000000 K 0.3333333333 0.3333333333 0.0000000000’
wdata(7) = ‘K 0.3333333333 0.3333333333 0.0000000000 G 0.0000000000 0.0000000000 0.0000000000’
wdata(8) = ‘end kpoint_path’

elecselfen = .false.
phonselfen = .false.
a2f = .false.

eptemp = 300 !
ngaussw = 0
degaussq = 0.03 ! meV
degaussw = 0.01 ! eV

prtgkk = .true.
efermi_read = .true.
fermi_energy = -2.5596
fsthick = 27.000

filkf = ‘Kpoint.dat’
filqf = ‘qpath.dat’

nk1 = 32
nk2 = 32
nk3 = 1
nq1 = 16
nq2 = 16
nq3 = 1
/
30 cartesian
0.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+00
0.000000000000000E+00 0.721687836486904E-01 0.000000000000000E+00
0.000000000000000E+00 0.144337567297381E+00 0.000000000000000E+00
0.000000000000000E+00 0.216506350946071E+00 0.000000000000000E+00
0.000000000000000E+00 0.288675134594762E+00 0.000000000000000E+00
0.000000000000000E+00 0.360843918243452E+00 0.000000000000000E+00
0.000000000000000E+00 0.433012701892143E+00 0.000000000000000E+00
0.000000000000000E+00 0.505181485540833E+00 0.000000000000000E+00
0.000000000000000E+00 -0.577350269189523E+00 0.000000000000000E+00
0.624999999999934E-01 0.108253175473036E+00 0.000000000000000E+00
0.624999999999934E-01 0.180421959121726E+00 0.000000000000000E+00
0.624999999999934E-01 0.252590742770416E+00 0.000000000000000E+00
0.624999999999934E-01 0.324759526419107E+00 0.000000000000000E+00
0.624999999999934E-01 0.396928310067797E+00 0.000000000000000E+00
0.624999999999934E-01 0.469097093716488E+00 0.000000000000000E+00
0.624999999999934E-01 0.541265877365178E+00 0.000000000000000E+00
0.124999999999987E+00 0.216506350946071E+00 0.000000000000000E+00
0.124999999999987E+00 0.288675134594762E+00 0.000000000000000E+00
0.124999999999987E+00 0.360843918243452E+00 0.000000000000000E+00
0.124999999999987E+00 0.433012701892143E+00 0.000000000000000E+00
0.124999999999987E+00 0.505181485540833E+00 0.000000000000000E+00
0.124999999999987E+00 0.577350269189523E+00 0.000000000000000E+00
0.187499999999980E+00 0.324759526419107E+00 0.000000000000000E+00
0.187499999999980E+00 0.396928310067797E+00 0.000000000000000E+00
0.187499999999980E+00 0.469097093716488E+00 0.000000000000000E+00
0.187499999999980E+00 0.541265877365178E+00 0.000000000000000E+00
0.249999999999973E+00 0.433012701892143E+00 0.000000000000000E+00
0.249999999999973E+00 0.505181485540833E+00 0.000000000000000E+00
0.249999999999973E+00 0.577350269189523E+00 0.000000000000000E+00
0.312499999999967E+00 0.541265877365178E+00 0.000000000000000E+00
[/code:3mufmd2h]

Hi Marti,

Could you also provide plots of the wannierized band structures and interpolated phonon dispersions?

For debugging purposes, it would be useful if some coarser k- and q-meshes were found where the problem exists. From your plot, it appears that the issue is for one of the acoustic branches.

In principle, you can output the e-ph matrix elements in q-e as well is you replace the following 4 files in PHONON/PH and use electron_phonon=‘simple’ flag in ph.in. The files can be found at:

https://drive.google.com/drive/folders/ ... sp=sharing

Best,
Roxana

Dear Roxana,

Thank you for your response and the QE modification for plotting the electron-phonon matrix element, and I apologize for the delay answering.

As you suggested Ive obtained the electron and phonon band structure for graphene. However while doing it Ive realized that ZA phonons near ? were not accurate for US pseudopotential. Therefore, I couldnt properly determine if the weird electron-phonon matrix element was caused by changing from NC to USPP or the bad phonons near ?.

Graphene EPW electron band structure for NC and US:

https://uab-my.sharepoint.com/:i:/g/per ... A?e=fg3YmL

Graphene EPW phonon dispersion for NC and US:

https://uab-my.sharepoint.com/:i:/g/per ... g?e=I3n126

Since I failed to obtain a good phonon structure with available USPP (from QE pseudopotential database) for graphene, I moved to SiC (here I provide EPW bands and electron-phonon matrix elements) and Si (for which, I provide EPW bands and electron-phonon matrix elements together with first-principles ones).

For SiC, I have plotted both electron and phonon band structure, with a good agreement between NC and US pseudopotentials. However, the obtained electron-phonon matrix elements present a similar discrepancy near ? similar to the one in graphene.

SiC EPW electron bandstructure for NC and US:

https://uab-my.sharepoint.com/:i:/g/per ... g?e=wrAa9t

SiC EPW phonon dispersion for NC and US:

https://uab-my.sharepoint.com/:i:/g/per ... Q?e=eJMiEP

SiC electron-phonon EPW matrix elements for NC and US:

https://uab-my.sharepoint.com/:i:/g/per ... Q?e=zL8AvI

Finally, for Si I have also obtained good agreement in bands between NC and US, but when plotting the electron-phonon matrix elements I have also got those weird deformations near ?. As you proposed I plotted the first-principles results, focusing on the weird one. I have obtained a quite good agreement for the NC pseudo. On the other hand, for USPP I obtain a first-principles result that, despite being in agreement with the NC result (so no weird deformation near ?), does not coincide with the EPW result.

Si EPW electron bandstructure for NC and US:

https://uab-my.sharepoint.com/:i:/g/per ... Q?e=uqHBfu

Si EPW phonon dispersion for NC and US:

https://uab-my.sharepoint.com/:i:/g/per ... w?e=9XmY3q

Si electron-phonon EPW matrix elements for NC and US:

https://uab-my.sharepoint.com/:i:/g/per ... g?e=8IVhab

Si electron-phonon FC results for NC and US for 3rd phonon branch near ?:

https://uab-my.sharepoint.com/:i:/g/per ... w?e=6K2sj9

Si electron phonon matrix elements comparing EPW and QE results for US:

https://uab-my.sharepoint.com/:i:/g/per ... g?e=gXKi4X

Si electron phonon matrix elements comparing EPW and QE results for NC:

https://uab-my.sharepoint.com/:i:/g/per ... A?e=i7fV9m

Therefore the weird deformation near ? is a common thing in my results for USPP, and they are not present at least in the Si case in first-principles calculations.

For completeness, I also provide the scf and EPW inputs.

SCF Si NC:
[code:c9rhzh58]
&control
calculation = ‘scf’
prefix = ‘si’
restart_mode = ‘from_scratch’
wf_collect = .true.
pseudo_dir = ‘./’
outdir = ‘./si’
tprnfor = .true.
tstress = .true.
forc_conv_thr = 5.0d-5
nstep = 60
/
&system
ibrav = 2
celldm(1) = 10.19342175021866
nat = 2
ntyp = 1
ecutwfc = 100.0
nbnd = 4
/
&electrons
diagonalization = ‘david’
mixing_beta = 0.3
conv_thr = 1.0d-12
/
ATOMIC_SPECIES
Si 28.0855 Si.upf
ATOMIC_POSITIONS alat
Si 0.00 0.00 0.00
Si 0.25 0.25 0.25
K_POINTS automatic
15 15 15 0 0 0
[/code:c9rhzh58]

EPW Si NC:
[code:c9rhzh58]

&inputepw
prefix = ‘si’
outdir = ‘./si/’
dvscf_dir = ‘./save’

elph = .true.
kmaps = .false.
epbwrite = .true.
epbread = .false.
epwwrite = .true.
epwread = .false.
lpolar = .false.

wannierize = .true.
nbndsub = 4
nbndskip = 0
num_iter = 2000
proj(1) = ‘f=0.0000000000,0.0000000000,0.000000000:sp3’
wdata(1) = ‘guiding_centres = true’

efermi_read = .true.
fermi_energy= 6.2464
elecselfen = .false.
phonselfen = .false.
a2f = .false.
prtgkk = .true.
fsthick = 30.0

filqf = ‘path.dat’
nkf1 = 1
nkf2 = 1
nkf3 = 1

nk1 = 15
nk2 = 15
nk3 = 15
nq1 = 5
nq2 = 5
nq3 = 5
/
10 {cartesian}
0.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+00
-0.200000000000026E+00 0.200000000000026E+00 -0.200000000000026E+00
-0.400000000000053E+00 0.400000000000053E+00 -0.400000000000053E+00
0.000000000000000E+00 0.400000000000053E+00 0.000000000000000E+00
-0.200000000000026E+00 0.600000000000079E+00 -0.200000000000026E+00
0.600000000000079E+00 -0.200000000000026E+00 0.600000000000079E+00
0.400000000000053E+00 0.555111512312578E-16 0.400000000000053E+00
0.000000000000000E+00 0.800000000000105E+00 0.000000000000000E+00
0.800000000000105E+00 0.000000000000000E+00 0.800000000000105E+00
0.600000000000079E+00 -0.200000000000026E+00 0.100000000000013E+01
[/code:c9rhzh58]

SCF Si US:
[code:c9rhzh58]
&control
calculation = ‘scf’
prefix = ‘si’
restart_mode = ‘from_scratch’
wf_collect = .true.
pseudo_dir = ‘./’
outdir = ‘./si’
tprnfor = .true.
tstress = .true.
forc_conv_thr = 5.0d-5
nstep = 60
/
&system
ibrav = 2
celldm(1) = 10.202280157854611
nat = 2
ntyp = 1
ecutwfc = 60.0
ecutrho = 720
nbnd = 4
/
&electrons
diagonalization = ‘david’
mixing_beta = 0.3
conv_thr = 1.0d-12
/
ATOMIC_SPECIES
Si 28.0855 Si.upf
ATOMIC_POSITIONS alat
Si 0.00 0.00 0.00
Si 0.25 0.25 0.25
K_POINTS automatic
15 15 15 0 0 0
[/code:c9rhzh58]

EPW Si US:
[code:c9rhzh58]

&inputepw
prefix = ‘si’
outdir = ‘./si/’
dvscf_dir = ‘./save’

elph = .true.
kmaps = .false.
epbwrite = .true.
epbread = .false.
epwwrite = .true.
epwread = .false.
lpolar = .false.

wannierize = .true.
nbndsub = 4
nbndskip = 0
num_iter = 2000
!dis_win_max = 16.5
dis_froz_max = 6.43685
proj(1) = ‘f=0.0000000000,0.0000000000,0.000000000:sp3’
wdata(1) = ‘dis_num_iter = 2000’
wdata(2) = ‘guiding_centres = true’

efermi_read = .true.
fermi_energy= 6.43685
elecselfen = .false.
phonselfen = .false.
a2f = .false.
prtgkk = .true.
fsthick = 30.0

filqf = ‘path.dat’
nkf1 = 1
nkf2 = 1
nkf3 = 1

nk1 = 15
nk2 = 15
nk3 = 15
nq1 = 5
nq2 = 5
nq3 = 5
/
10 {cartesian}
0.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+00
-0.199999999999910E+00 0.199999999999910E+00 -0.199999999999910E+00
-0.399999999999819E+00 0.399999999999819E+00 -0.399999999999819E+00
0.000000000000000E+00 0.399999999999819E+00 0.000000000000000E+00
-0.199999999999910E+00 0.599999999999729E+00 -0.199999999999910E+00
0.599999999999729E+00 -0.199999999999910E+00 0.599999999999729E+00
0.399999999999819E+00 0.555111512312578E-16 0.399999999999819E+00
0.000000000000000E+00 0.799999999999638E+00 0.000000000000000E+00
0.799999999999638E+00 0.000000000000000E+00 0.799999999999638E+00
0.599999999999729E+00 -0.199999999999910E+00 0.999999999999548E+00
[/code:c9rhzh58]

SCF SiC NC:
[code:c9rhzh58]
&control
calculation = ‘scf’
prefix = ‘sic’
restart_mode = ‘from_scratch’
wf_collect = .true.
pseudo_dir = ‘./’
outdir = ‘./sic’
tprnfor = .true.
tstress = .true.
forc_conv_thr = 5.0d-5
nstep = 60
/
&system
ibrav = 2
celldm(1) = 8.276808525081007
nat = 2
ntyp = 2
ecutwfc = 100.0
nbnd = 4
/
&electrons
diagonalization = ‘david’
mixing_beta = 0.3
conv_thr = 1.0d-12
/
ATOMIC_SPECIES
Si 28.0855 Si.upf
C 12.0107 C.upf
ATOMIC_POSITIONS alat
Si 0.00 0.00 0.00
C 0.25 0.25 0.25
K_POINTS automatic
18 18 18 0 0 0
[/code:c9rhzh58]

EPW SiC NC:
[code:c9rhzh58]

&inputepw
prefix = ‘sic’
amass(1) = 28.0855
amass(2) = 12.0107
outdir = ‘./sic/’
dvscf_dir = ‘./save’

elph = .true.
kmaps = .false.
epbwrite = .true.
epbread = .false.
epwwrite = .true.
epwread = .false.
lpolar = .true.

wannierize = .true.
nbndsub = 4
nbndskip = 0
num_iter = 300
proj(1) = ‘Si:sp3’

elecselfen = .false.
phonselfen = .false.
a2f = .false.
prtgkk = .true.

fsthick = 25.0
eptemp = 20
degaussw = 0.05

filqf = ‘path.dat’
nkf1 = 1
nkf2 = 1
nkf3 = 1

nk1 = 18
nk2 = 18
nk3 = 18
nq1 = 6
nq2 = 6
nq3 = 6
/
16 {cartesian}
0.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+00
-0.166666666666666E+00 0.166666666666666E+00 -0.166666666666666E+00
-0.333333333333333E+00 0.333333333333333E+00 -0.333333333333333E+00
0.499999999999999E+00 -0.499999999999999E+00 0.499999999999999E+00
0.000000000000000E+00 0.333333333333333E+00 0.000000000000000E+00
-0.166666666666666E+00 0.499999999999999E+00 -0.166666666666666E+00
0.666666666666666E+00 -0.333333333333333E+00 0.666666666666666E+00
0.499999999999999E+00 -0.166666666666667E+00 0.499999999999999E+00
0.333333333333333E+00 0.277555756156289E-16 0.333333333333333E+00
0.000000000000000E+00 0.666666666666666E+00 0.000000000000000E+00
0.833333333333332E+00 -0.166666666666667E+00 0.833333333333332E+00
0.666666666666666E+00 -0.555111512312578E-16 0.666666666666666E+00
0.000000000000000E+00 -0.999999999999999E+00 0.000000000000000E+00
0.666666666666666E+00 -0.333333333333333E+00 0.999999999999999E+00
0.499999999999999E+00 -0.166666666666667E+00 0.833333333333332E+00
-0.333333333333333E+00 -0.999999999999999E+00 0.000000000000000E+00
[/code:c9rhzh58]

SCF SiC US:
[code:c9rhzh58]
&control
calculation = ‘scf’
prefix = ‘sic’
restart_mode = ‘from_scratch’
wf_collect = .true.
pseudo_dir = ‘./’
outdir = ‘./sic’
tprnfor = .true.
tstress = .true.
forc_conv_thr = 5.0d-6
nstep = 60
/
&system
ibrav = 2
celldm(1) = 8.273064350019162
nat = 2
ntyp = 2
ecutwfc = 100.0
ecutrho = 1200.0
nbnd = 4
/
&electrons
diagonalization = ‘david’
mixing_beta = 0.3
conv_thr = 1.0d-12
/
ATOMIC_SPECIES
Si 28.0855 Si.upf
C 12.0107 C.upf
ATOMIC_POSITIONS alat
Si 0.00 0.00 0.00
C 0.25 0.25 0.25
K_POINTS automatic
18 18 18 0 0 0
[/code:c9rhzh58]

EPW SiC US:
[code:c9rhzh58]

&inputepw
prefix = ‘sic’
amass(1) = 28.0855
amass(2) = 12.0107
outdir = ‘./sic/’
dvscf_dir = ‘./save’

elph = .true.
kmaps = .false.
epbwrite = .true.
epbread = .false.
epwwrite = .true.
epwread = .false.
lpolar = .true.

wannierize = .true.
nbndsub = 4
nbndskip = 0
num_iter = 300
proj(1) = ‘Si:sp3’

elecselfen = .false.
phonselfen = .false.
a2f = .false.
prtgkk = .true.

fsthick = 25.0
eptemp = 20
degaussw = 0.05

filqf = ‘path.dat’
nkf1 = 1
nkf2 = 1
nkf3 = 1

nk1 = 18
nk2 = 18
nk3 = 18
nq1 = 6
nq2 = 6
nq3 = 6
/
16 {cartesian}
0.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+00
-0.166666666666663E+00 0.166666666666663E+00 -0.166666666666663E+00
-0.333333333333327E+00 0.333333333333327E+00 -0.333333333333327E+00
0.499999999999990E+00 -0.499999999999990E+00 0.499999999999990E+00
0.000000000000000E+00 0.333333333333327E+00 0.000000000000000E+00
-0.166666666666663E+00 0.499999999999990E+00 -0.166666666666663E+00
0.666666666666654E+00 -0.333333333333327E+00 0.666666666666654E+00
0.499999999999990E+00 -0.166666666666663E+00 0.499999999999990E+00
0.333333333333327E+00 0.277555756156289E-16 0.333333333333327E+00
0.000000000000000E+00 0.666666666666654E+00 0.000000000000000E+00
0.833333333333317E+00 -0.166666666666663E+00 0.833333333333317E+00
0.666666666666654E+00 -0.555111512312578E-16 0.666666666666654E+00
0.000000000000000E+00 -0.999999999999980E+00 0.000000000000000E+00
0.666666666666654E+00 -0.333333333333327E+00 0.999999999999980E+00
0.499999999999990E+00 -0.166666666666663E+00 0.833333333333317E+00
-0.333333333333327E+00 -0.999999999999980E+00 0.555111512312578E-16
[/code:c9rhzh58]

Mart

Hi Marti,

Can you repeat the epw calculations for Si with the use_ws = .true. flag?

Could you please provide your nscf.in, ph.in, and path.dat files as well as US and NC pseudo files for Si and I will try to look over this issue in the coming weeks.

Best,
Roxana

Hi Roxana,

Thank you for your fast response,

As you suggested I repeated the calculations with the use_ws flag. However, it does not significantly modify the results between NC and US pseudopotentials (the deformation near ? is still present).

*The EPW electron-phonon matrix elements for US and NC pseudos, using the use_ws flag

https://uab-my.sharepoint.com/:i:/g/per ... w?e=zIzIPl

You can find the input files, pseudopotentials and path file in the following link:

https://uab-my.sharepoint.com/:u:/g/per ... g?e=zqclXl

Mart

Hi Marti,

Thanks for running more tests and providing the input files. Hopefully, I will get a chance to look over this issue in the coming weeks (this period is quite busy for me).

Best,
Roxana

Hi Marti,

I started running some tests for Si with NC and USPP and I have a couple of questions regarding your results:

  1. Does the label "fp" in your plots means frozen phonon?

  2. Can you provide the input files for the e-ph matrix elements obtained with QE? Did you used the modified files that I provided to calculate the e-ph matrix elements with QE or a different approach?

Best,
Roxana

Hi Roxana,

The "fp" from my graphs means first principles (directly obtained from QE).

For obtaining them i have used the modified files that you have provided.

*QE INPUT FILE:
[code:1ffg8d7n]

&inputph
outdir = ‘./si’,
prefix = ‘si’,
fildyn = ‘si.dyn’,
fildvscf = ‘dvscf’,
tr2_ph = 1.0d-16
electron_phonon=‘simple’
/
Q1 Q2 Q3
[/code:1ffg8d7n]

*The qpoint list that I have used:
[code:1ffg8d7n]
-0.3500000 0.3500000 0.3500000
-0.3333333 0.3333333 0.3333333
-0.3166667 0.3166667 0.3166667
-0.3000000 0.3000000 0.3000000
-0.2833333 0.2833333 0.2833333
-0.2666667 0.2666667 0.2666667
-0.2500000 0.2500000 0.2500000
-0.2333333 0.2333333 0.2333333
-0.2166667 0.2166667 0.2166667
-0.2000000 0.2000000 0.2000000
-0.1833333 0.1833333 0.1833333
-0.1666667 0.1666667 0.1666667
-0.1500000 0.1500000 0.1500000
-0.1333333 0.1333333 0.1333333
-0.1166667 0.1166667 0.1166667
-0.1000000 0.1000000 0.1000000
-0.0833333 0.0833333 0.0833333
-0.0666667 0.0666667 0.0666667
-0.0500000 0.0500000 0.0500000
-0.0333333 0.0333333 0.0333333
-0.0166667 0.0166667 0.0166667
0.0000000 0.0000000 0.0000000
[/code:1ffg8d7n]

And the bash script to generate inputs from those two files:
[code:1ffg8d7n]
#Use: script file_with_qpts
i=1
while read q1 q2 q3 remainder
do
echo "$i $q1 $q2 $q3"
sed -e "s:Q1:$q1:g" -e "s:Q2:$q2:g" -e "s:Q3:$q3:g" si.ph.in > si.ph-$i.in
let "i++"
done < $1
[/code:1ffg8d7n]

Best,

Mart

Hi Marti,

I updated the USPP implementation in EPW and the corrections were made available in the QE developer branch on gitlab. I hope this would solve the problems you encountered.

Best,
Roxana